{"id":4298,"date":"2023-12-07T04:37:05","date_gmt":"2023-12-07T04:37:05","guid":{"rendered":"https:\/\/vegaprocessors.in\/blog\/?p=4298"},"modified":"2023-12-07T04:37:05","modified_gmt":"2023-12-07T04:37:05","slug":"interfacing-at24c256-eeprom-with-vega-aries-boards","status":"publish","type":"post","link":"https:\/\/vegaprocessors.in\/blog\/interfacing-at24c256-eeprom-with-vega-aries-boards\/","title":{"rendered":"Interfacing AT24C256 EEPROM with VEGA ARIES Boards"},"content":{"rendered":"\n

In this tutorial, we will see how we can interface AT24C256 EEPROM module to ARIES v3.0 Board. EEPROM stands for Electrically Erasable Programmable Read-only Memory.<\/p>\n\n\n\n

EEPROM<\/h2>\n\n\n\n

It is a type of non-volatile memory used in computers, integrated in micro controllers for Smart cards and remote key-less systems, and other electronic devices to store relatively small amounts of data by allowing individual bytes to be erased and reprogrammed. EEPROMs can be programmed and erased in-circuit, by applying special programming signals. The AT24C256 EEPROM is organized as 32,768 words of 8 bits each. The device is optimized for use in many industrial and commercial applications where low power and low voltage operation are essential.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Circuit Diagram:<\/h2>\n\n\n\n
\"\"<\/figure>\n\n\n\n

Connections:<\/h2>\n\n\n\n
EEPROM Module<\/strong><\/td>ARIES v3 board<\/strong><\/td><\/tr>
VCC<\/td>3V3<\/td><\/tr>
SCL<\/td>SCL-0<\/td><\/tr>
SDA<\/td>SDA-0<\/td><\/tr>
GND<\/td>GND<\/td><\/tr><\/tbody><\/table>
Connection pins of EEPROM Module & ARIES v3.0 Board<\/strong><\/em><\/figcaption><\/figure>\n\n\n\n

Procedure:<\/h2>\n\n\n\n

Open and set up the Arduino IDE as described in Getting Started with ARIES v3.0<\/a>.<\/p>\n\n\n\n