{"id":3034,"date":"2023-09-05T05:26:18","date_gmt":"2023-09-05T05:26:18","guid":{"rendered":"https:\/\/vegaprocessors.in\/blog\/?p=3034"},"modified":"2023-09-05T05:26:18","modified_gmt":"2023-09-05T05:26:18","slug":"how-to-test-interrupt-with-aries-v2","status":"publish","type":"post","link":"https:\/\/vegaprocessors.in\/blog\/how-to-test-interrupt-with-aries-v2\/","title":{"rendered":"How to test interrupt with ARIES v2?"},"content":{"rendered":"\n

In this tutorial we will see how we can use the GPIO interrupt pins on the ARIES v2.0 board. The ARIES v3 and IoT board also has these same interrupt pins which can be use in same way. <\/p>\n\n\n\n

ARIES v2.0<\/h2>\n\n\n\n

The ARIES v2.0 is a fully indigenous and a \u201cMade in India\u201d product to get started with basic microprocessor programming and embedded systems. This board is built upon a RISC-V ISA compliant VEGA Processor with easy-to-use hardware and software. For more details about ARIES v2.0 boards please refer to the ARIES development boards and Ecosystem<\/a>.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

GPIO Interrupts in ARIES v2<\/h2>\n\n\n\n

Interrupts stop the current job of ARIES such that some other job can be done. The ARIES (THEJAS 32) has interrupts in GPIO pins which are active HIGH interrupts. The interrupt pins are available in GPIO-0 to GPIO-11. The below table shows the GPIO pins and corresponding interrupt numbers respectively.<\/p>\n\n\n\n

Peripheral <\/strong><\/td>Interrupt Number<\/strong><\/td><\/tr>
GPIO-0<\/td>10<\/td><\/tr>
GPIO-1<\/td>11<\/td><\/tr>
GPIO-2<\/td>12<\/td><\/tr>
GPIO-3<\/td>13<\/td><\/tr>
GPIO-4<\/td>14<\/td><\/tr>
GPIO-5<\/td>15<\/td><\/tr>
GPIO-6<\/td>16<\/td><\/tr>
GPIO-7<\/td>17<\/td><\/tr>
GPIO-8<\/td>18<\/td><\/tr>
GPIO-9<\/td>19<\/td><\/tr>
GPIO-10<\/td>20<\/td><\/tr>
GPIO-11<\/td>21<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Push Button<\/h2>\n\n\n\n

Push Buttons<\/strong> are normally-open tactile switches<\/strong>. Push buttons allow us to power the circuit or make any particular connection only when we press the button. Simply, it makes the circuit connected when pressed and breaks when released.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Prerequisites<\/h2>\n\n\n\n